“How much will it cost to run?” is one of the first questions we’re asked about air conditioning. The honest answer is that it depends on the system, the room and how you use it. But you can make a good estimate, and there are clear ways to bring the cost down.
How much electricity does air conditioning use?
What matters is the electrical power the system draws, not its cooling capacity. Modern systems produce several kilowatts of cooling for every kilowatt of electricity they consume. As an illustration:
- A 2.5kW cooling unit with a seasonal efficiency (SEER) of around 6 draws roughly 0.4kW of electricity when running at full output
- At an example electricity rate of 25p per kWh, that’s around 10p per hour at full output
- In practice an inverter system spends much of its time running below full output once the room has cooled, so typical hourly costs are often lower
Your actual cost depends on your tariff, the size of the system, how hot it is and your set temperature, but the calculation is the same: electrical input (kW) × hours × price per kWh.
What do SEER and SCOP ratings mean?
SEER (seasonal energy efficiency ratio) measures cooling efficiency across a typical season. SCOP (seasonal coefficient of performance) measures heating efficiency. Higher numbers mean more cooling or heating for each unit of electricity. Comparing them between models is one of the best ways to judge future running costs, often more useful than comparing purchase prices.
Is it cheaper to heat with air conditioning?
Often, yes. A split system in heating mode works as an air-to-air heat pump, moving heat from outside into the room. With a SCOP of around 4, it delivers roughly 4kWh of heat for each 1kWh of electricity. A plug-in electric heater delivers 1kWh of heat per 1kWh. For rooms that are otherwise heated by electric heaters, that difference is substantial.
Why a poorly maintained system costs more to run
Efficiency ratings assume a clean system with the correct refrigerant charge. In the real world, dusty filters restrict airflow, dirty coils can’t transfer heat properly and a slow refrigerant leak reduces capacity. The system compensates by running longer and harder, so you pay more for the same comfort. A professional service restores the system to the performance you paid for.
When does replacing an old system save money?
Older fixed-speed systems switch fully on and off, which is less efficient than a modern inverter. Systems that use R22 refrigerant can no longer be serviced with it in the UK, so any leak becomes a major problem. If your system is old, inefficient and needing frequent repairs, a new correctly sized installation can pay back through lower bills and fewer call-outs.
Four quick ways to lower running costs
- Size it correctly. Oversized and undersized units both waste energy.
- Choose higher SEER and SCOP ratings when buying or replacing.
- Service it annually to keep it running at rated efficiency.
- Use sensible settings. Our guide to keeping cool without wasting energy covers temperatures, modes and timers.
Want an honest view of your running costs?
If you’re considering air conditioning, or wondering whether your current system is costing too much, get in touch. We’ll give you straightforward advice based on your property and how you plan to use it.


